Safety Instructions; Contents Of The Package - Lanberg 4–CHANNEL ICS–0404–0020 User Manual

A. SAFETY INSTRUCTIONS
1. The device should be used in well–ventilated rooms.
2. Protect the recorder against contact with dust and moisture.
3. Use a dedicated power source. Use of an unsuitable power source can damage the equipment.
4. The device should be cleaned of dust on a regular basis.
5. Never open the recorder casing while the device is connected to the power supply.
6. Do not repair faults yourself, always contact an authorized service center or technical support to do so.
7. The recorder and cameras included in the set are especially vulnerable to damage caused by overvoltages
caused by e.g. lightning discharges, so they should be protected with additional surge protectors.
8. All tests and repairs should be performed by qualified personnel. The manufacturer is not responsible for any
damage caused by unauthorized modifications or repairs.
NOTE: THE MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES TO THE PARAMETERS OF THE
EQUIPMENT AND THE METHOD OF OPERATION WITHOUT PRIOR NOTICE. DUE TO THE CONTINUOUS
IMPROVEMENT OF THE CURRENT SYSTEM AS WELL AS THE SYSTEM CONFIGURATION, SOME
FEATURES DESCRIBED IN THE FOLLOWING MANUAL MAY SLIGHTLY DIFFER FROM REALITY.
B. CONTENTS OF THE PACKAGE
Each monitoring set includes:
1. WIFI recorder.
2. Bag with 4 screws for HDD mounting.
3. Power supply for the recorder (DC 12V 2A).
4. Instruction manual.
Depending on the model, the set also includes:
ITEM NAME
WIFI IP camera
Power supply for cameras – DC 12V 1A
Mounting kit for cameras
Patch cable
NOTE: HARD DISK DRIVE NOT INCLUDED
4
QUANTITY
4–CHANNEL ICS–0404–0020
4 pieces
4 pieces
4 pieces
1 piece
Lanberg © 2015-2021
8–CHANNEL ICS–0808–0020
8 pieces
8 pieces
8 pieces
2 pieces
EN