Lanberg 4–CHANNEL ICS–0404–0020 User Manual page 20

The add device window will open, there are two
adding methods:
1. IP/DDNS
2. Cloud ID.
NOTE: TO USE THE IP/DDNS CONNECTION, YOU MUST
HAVE A PERMANENT IP ADDRESS OR CONFIGURE A
DDNS ADDRESS (SEE SECTION H.3.B). WE RECOM-
MEND CONNECTING VIA CLOUD ID, SEE NEXT STEP.
By default, the first method is to connect via IP/DDNS. To
connect you need to manually enter the recorder details:
IP/DDNS – IP or DDNS address of the recorder.
Port – protocol port, necessary to connect to IP/DDNS
User Name – login to access the recorder.
Password – access password to the recorder.
Area – inactive function.
Device Name – here you can give the device a name of
your choice.
Type – the type of the device, when you select the number
of channels, the field is automatically switched to NVR. The
application also allows you to add individual standalone
cameras (not included).
Number of Channels – select the number of
connected channels.
Channel Serial – channel number for which the name
is selected.
Channel Name – name of the currently selected channel.
Cloud ID
If you are using a
ing settings manually:
Cloud ID – the unique cloud number of the recorder. You
can find it in the system settings, see Section H.3.A
User Name – login to access the recorder.
Password – access password to the recorder.
Area – inactive function.
Device Name – here you can give the device a name of
your choice.
Type – the type of the device, when you select the number
of channels, the field is automatically switched to NVR. The
application also allows you to add individual standalone
cameras (not included).
Number of Channels – select the number of
connected channels.
Channel Serial – channel number for which the name
is selected.
Channel Name – name of the currently selected channel
When the addition is complete, the menu returns to the
main window, from which you can manage the newly
added recorder.
20
connection, fill in the follow-
Lanberg © 2015-2021 EN