Channel Settings - Lanberg 4–CHANNEL ICS–0404–0020 User Manual

d. Wireless settings
Settings for the recorder's internal WIFI network where cameras
are connected to the recorder.
BSSID – MAC address of the internal network of the recorder.
ESSID – internal network name.
Password – internal network password.
Channel – currently selected network channel.
Region – region of the world, the setting affects the available
channel list.
The table on the right displays all currently connected cameras
with their MAC addresses.
e. PPPOE settings
In this menu you can configure the connection of the recorder
to the PPPoE server.
Login – login used to connect to the PPPoE server.
Password – password to access the PPPoE server.
Below the current status of the PPPoE connection is displayed
and, if connected, the currently assigned PPPoE IP address.
f. Wireless connections
In this window you can configure the wireless connection to the
WIFI network. After enabling this function, the table will display
the available WIFI networks, selecting it will import its name,
channel and current signal strength.
MAC address – external MAC address of the recorder.
WIFI name – after selecting a network from the list, the network
name will be imported here. To connect to a network whose
name is hidden, manually enter its name.
Password – password to access the WIFI network.

4. Channel settings

a. Encoding settings
The menu allows you to adjust the parameters of specific
channels. Each channel has two versions of the video stream –
main and sub. The main one is responsible for the quality of the
recorded image, while the sub is responsible for the quality of
the image displayed via remote access.
Channel – for which channel the settings are changed.
Bitrate mode – allows to set whether cameras should have fixed
or variable bitrate.
Resolution – this setting determines the resolution of the
channel (maximum resolution depends on the quality of the
camera sensor).
Bitrate – maximum allowed bitrate of the camera (in case of fixed bitrate mode it is the value with which the image
will always be transmitted).
Framerate – number of frames per second.
Encoding – the format in which video from cameras is to be recorded.
Copy to – allows you to copy current settings to selected channels.
12
Lanberg © 2015-2021 EN