Camera Settings; Camera Management; Adding New Cameras - Lanberg 4–CHANNEL ICS–0404–0020 User Manual

e. Factory settings
Restore factory settings – after selecting this function recorder
will be restored to factory settings. User, channel and network
settings remain unchanged.
Configuration Import / Export – allows you to export the
configuration of the recorder before the restoration and import
it later.
I. CAMERA SETTINGS

1. Camera management

a. Arrows – allow you to move cameras between channels
b. Delete channel – allows you to delete the
selected channel.
c. Delete all – allows you to delete all channels.
d. Edit – allows you to modify network parameters of
a camera, such as IP address, login/password, showing
MAC address, etc.
e. Channel settings – opens the channel settings window,
described in detail in Section H.4.B.
f. Wireless settings – opens the Network and IP settings
window, described in detail in Section H.3.D.
g. Repeater – opens the Repeater Settings window, de-
scribed in detail in section K.

2. Adding new cameras

a. Search – the recorder will search the network for uncon-
nected IP cameras.
b. Pair allows you to synchronize unconnected WIFI came-
ras from other kits or manufacturers.
NOTE: IP CAMERAS FROM OTHER SETS AND MANUFAC-
TURERS MUST BE PRE–CONNECTED VIA NETWORK CABLE
DIRECTLY TO THE RECORDER OTHERWISE THEY WILL NOT
BE DETECTED.
NOTE: WHEN PAIRING IS COMPLETE, YOU CAN DISCON-
NECT THE NETWORK CABLE CONNECTING THE CAMERA TO
THE RECORDER.
c. Add – allows you to add cameras found in the network
to specific channels.
d. Change IP – allows you to modify network parameters of
a camera before connecting it to the recorder, such as IP
address, login/password, showing MAC address, etc.
e. Advanced – in this window you can allow to add the
same camera on many channels and whether the came-
ras should have their bitrate set automatically.
EN Lanberg © 2015-2021
15