Intended use 3. Personal safety a. Stay alert, watch what you are doing and use Your BLACK+DECKER BES301 saw has been designed for common sense when operating a power tool. sawing wood, plastics, and sheet metal. This tool is intended Do not use a power tool while you are tired or for consumer use only.
Page 5
English (original instructions) tool. Power tools are dangerous in the hands of ● The blade will continue to move after releasing the untrained users. switch. Always switch the tool off and wait for the saw e. Maintain power tools and accessories. Check for blade to come to a complete standstill before putting the misalignment or binding of moving parts, breakage tool down.
Page 6
An accidental start-up can If the supply cord is damaged, it must be replaced by the cause injury. manufacturer or an authorised BLACK+DECKER Service ● The shoe (2) will adjust to limit the depth of cut. Centre in order to avoid a hazard.
To maximize flush cutting capabilities: Maintenance ● Insert the blade shaft into the blade clamp with the teeth Your BLACK+DECKER tool has been designed to operate of the blade facing up. over a long period of time with a minimum of maintenance.
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and receive updates on MACHINERY DIRECTIVE new products and special offers. BES301 Reciprocating Saw Black & Decker declares that these products described under “technical data” are in compliance with: EN62841-1:2015 , EN62841-2-11:2016.