KFBES500 KFBES500 Intended use Your BLACK+DECKER jig saw KFBES410, KFBES500 has been designed for sawing wood, plastics and metal. This tool is intended for consumer use only. Safety instructions General power tool safety warnings Warning! Read all safety warnings and all instructions.
Page 4
ENGLISH (Original instructions) b. Avoid body contact with earthed or grounded 4. Power tool use and care surfaces such as pipes, radiators, ranges and a. Do not force the power tool. Use the correct power refrigerators. There is an increased risk of electric shock tool for your application.
If the supply cord is damaged, it must be replaced by the Additional residual risks may arise when using the tool which manufacturer or an authorised BLACK+DECKER Service may not be included in the enclosed safety warnings. These Centre in order to avoid a hazard.
Page 6
To switch the tool off, release the variable speed switch. To Fitting the saw blade (fig. A - KFBES410) switch the tool off, when in continuous operation, press the Before fitting or removing the saw blade (7) the saw blade variable speed switch once more and release it.
Warning! Do not use a vacuum when cutting metal. Metal Maintenance filings will be hot and may cause fire. Your BLACK+DECKER tool has been designed to operate Be aware that sawing metal takes much more time than sawing wood. over a long period of time with a minimum of maintenance.