Alvarion BreezeACCESS SU-M-900 Installation Manual page 28

3-4
Parameter
Manual Sequence Definition
Scan Entire Band
Scan Entire Sub Band
Transmit Level
VLAN Link Type
VLAN ID – Management
Best AU Support
Preferred AU MAC Address
Scanning Mode
Max TX Data
Authentication Algorithm
Default Key ID
WEP Key 1-4
Encryption Seed
Encryption Polynom Index
BreezeACCESS SU-M-900 Installation Guide
Default Value
Enable
Disable
24 dBm
Hybrid Link
65535
Disable
00-00-00-00-00-00
(none)
Active
3 Mbps
Open System
1
0000000000 (none)
7
0
Comment
Applicable only when
Scrambling Mode is
configured to Manual
Scrambling and HDM Mode
in the AU is disabled.
It is recommended to
disable if the roaming scan
feature is enabled (see
Changes in HDM/Flexible
Hopping Definition
Parameters, on page 3-10).
It is recommended to
enable if the roaming scan
feature is enabled (see
Changes in HDM/Flexible
Hopping Definition
Parameters, on page 3-10).
Retain the default setting.
Retain the default setting.
Retain the default setting.
Applicable only when Best
AU Support is enabled.
Set to 2 Mbps to improve
throughput by limiting
maximum rate to be used
by the multi-rate algorithm
Can be changed to Shared
Key only after configuring
the WEP Key and the
Default Key ID