Settings - Electrolux KEAF7100L User Manual

8 www.electrolux.com
Programme
5)
6)
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
2) This programme offers the most efficient use of water and energy consumption for crock‐
ery and cutlery with normal soil. This is the standard programme for test institutes. This pro‐
gramme is used to assess compliance with the Ecodesign Comission Regulation (EU)
2019/2022.
3) In accordance with the 1016/2010 regulation
4) In accordance with the 2019/2022 regulation
5) This programme is suitable for washing a load or a half load with fresh or light soil in a
short time.
6) With this programme, you can quickly rinse off food remains from dishes and prevent
odours forming in the appliance. Do not use detergent with this programme.
5.1 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email
to:
info.test@dishwasher-production.com

6. SETTINGS

6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
Degree of soil Programme
Type of load phases
Normal soil • Prewash
Crockery and • Wash 65 °C
cutlery • Rinses
• Dry
Fresh soil • Wash 60 °C
Crockery and or 65 °C
cutlery • Rinses
All • Prewash
Consumption values
1)
Duration Energy
(min) (kWh)
90 0.886 -
1.083
30 0.556 -
0.680
15 0.012 -
0.015
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
Water
(l)
9.6 - 11.7
9.2 - 11.2
3.4 - 4.2