Table of Contents
Advertisement
6.1 Consumption values
Programme
1) The pressure and the temperature of the water, the variations of the mains supply, the
options, the quantity of dishes and the degree of soil can change the values.
2) The values for programmes other than ECO are indicative only.
3) In accordance with the UAE.S5010-6:2019 regulation.
Information for test institutes
To receive the necessary information for conducting performance tests (e.g. according
to: EN60436 ), send an email to:
info.test@dishwasher-production.com
In your request, include the product number code (PNC) from the rating plate.
For any other questions regarding your dishwasher, refer to the service book provided
with your appliance.
7. SETTINGS
7.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode, you can set a
programme and enter user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the
AirDry.
The saved settings remain valid until
you change them again.
Water
1)2)
(l)
10.7
12.4
10.6
10.2
4.2
Energy
(kWh)
3)
0.921
1.170
0.990
0.620
0.020
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the on/off button until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter the user mode, press and hold
the programme button until the indicator
ENGLISH
Duration
(min)
3)
240
160
90
30
15
9
3)
Advertisement
Table of Contents
