Electrolux KESC8300L User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Dishwasher
  5. KESC8300L
  6. User manual

Electrolux KESC8300L User Manual

Hide thumbs Also See for KESC8300L:
Table of Contents

Advertisement

Quick Links

KESC8300L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux KESC8300L

Summary of Contents for Electrolux KESC8300L

  • Page 1 KESC8300L Dishwasher User Manual...

  • Page 2: Table Of Contents

    13. ADDITIONAL TECHNICAL INFORMATION...........25 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The operating water pressure (minimum and • maximum) must be between 0.5 (0.05) / 8 (0.8) bar (MPa) Follow the maximum number of 14 place settings. • If the supply cord is damaged, it must be replaced by •...

  • Page 5: Water Connection

    ENGLISH • Make sure not to cause damage to • If the water inlet hose is damaged, the mains plug and to the mains immediately close the water tap and cable. Should the mains cable need to disconnect the mains plug from the be replaced, this must be carried out mains socket.

  • Page 6: Product Description

    3. PRODUCT DESCRIPTION Ceiling spray arm Rinse aid dispenser Upper spray arm Detergent dispenser Lower spray arm Lower basket Filters Upper basket Rating plate Cutlery drawer Salt container Air vent 3.1 Beam-on-Floor The Beam-on-Floor is off when the appliance is The Beam-on-Floor is a light that is deactivated.

  • Page 7: Control Panel

    ENGLISH 4. CONTROL PANEL On/Off button EXTRAS buttons Delay Start button AUTO Sense button Display MY TIME selection bar 4.1 Display 4.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. indicates the most environmentally friendly programme selection for a A.

  • Page 8: Before First Use

    5. BEFORE FIRST USE 1. Make sure that the current level of 4. Carefully shake the funnel by its the water softener agrees with the handle to get the last granules inside. hardness of the water supply. If 5. Remove the salt around the opening not, adjust the level of the water of the salt container.

  • Page 9: Programme Selection

    ENGLISH 3. Remove the spilled rinse aid with an You can turn the selector of absorbent cloth to prevent too much the released quantity (B) foam. between position 1 (lowest 4. Close the lid. Make sure that the quantity) and position 4 or 6 release button locks into position.
  • Page 10 6.4 Programmes overview Pro‐ Type of load Degree of Programme phases EXTRAS gramme soil 30min • Crockery • Fresh • Wash 50 °C • ExtraPower • Cutlery • Intermediate rinse • GlassCare • Final rinse 45 °C • AirDry •...

  • Page 11: Basic Settings

    ENGLISH Consumption values Water (l) Energy (kWh) Duration (min) Programme 30min 9.9 -12.1 0.56 - 0.69 Pre-rinse 4.1 - 5.0 0.01 - 0.04 10.4 - 12.7 0.83 - 0.96 90min 10.3 - 12.6 0.96 - 1.09 2h 40min 9.8 - 12.0 1.05 - 1.18 10.5 0.832...

  • Page 12: The Water Softener

    Number Settings Values Description Latest pro‐ Enable or disable the automatic selec‐ gramme selec‐ Off (default) tion of the most recently used pro‐ tion gramme and options. 1) For more details, refer to the information provided in this chapter.
  • Page 13 ENGLISH German de‐ French de‐ mmol / l Clarke de‐ Water softener grees (°dH) grees (°fH) grees level <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. Regardless of the type of detergent during the drying phase and remains used, set the proper water hardness ajar.

  • Page 14: Daily Use

    7.6 Latest programme selection setting mode while the programme is running. You can set the automatic selection of To enter setting mode, press and hold the most recently used programme and options. simultaneously about 3 seconds. The latest programme that was...
  • Page 15 ENGLISH 8.1 Using the detergent • The display shows the programme duration. 2. Close the appliance door to start the programme. 8.4 How to activate EXTRAS 1. Select a programme using MY TIME selection bar. 2. Press the button dedicated to the option you want to activate.

  • Page 16: Hints And Tips

    The appliance senses the type of load Make sure that there is and adjusts a suitable wash cycle. detergent in the detergent During the cycle, the sensors operate dispenser before you start a several times and the initial program new programme.

  • Page 17: Loading The Baskets

    ENGLISH 1''). Follow the instructions on the • The filters are clean and correctly packaging. installed. • Select a programme according to the • The cap of the salt container is tight. type of load and the degree of soil. •...

  • Page 18: Care And Cleaning

    10. CARE AND CLEANING 10.2 Internal cleaning WARNING! Before any maintenance • Carefully clean the appliance, other than running the including the rubber gasket of the programme Machine Care, door, with a soft damp cloth. deactivate the appliance and •...
  • Page 19 ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
  • Page 20 (C) is installed in the delivery tube (A) with the mounting element (B). 2. Wash the spray arm under running water. Use a thin pointed tool, e.g. a toothpick, to remove particles of soil from the holes. 1. Release the stoppers on the sides of the sliding rails of the cutlery drawer and pull the drawer out.

  • Page 21: Troubleshooting

    ENGLISH 5. To install the spray arm (C) back, insert the mounting element (B) in the spray arm and fix it in the delivery tube (A) by turning it clockwise. Make sure that the mounting element locks into place. 6. Install the cutlery drawer on the sliding rails and block the stoppers.
  • Page 22 Problem and alarm code Possible cause and solution The appliance does not • Make sure that the sink spigot is not clogged. drain the water. • Make sure that the filter in the outlet hose is not clog‐ ged.
  • Page 23 ENGLISH 11.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.

  • Page 24: Product Information Sheet

    12. PRODUCT INFORMATION SHEET Trade Mark Electrolux Model KESC8300L 911536434 Rated capacity (standard place settings) Energy efficiency class A+++ Energy consumption in kWh per year, based on 280 standard cleaning cycles using cold water fill and the consumption of the low power modes.

  • Page 25: Additional Technical Information

    ENGLISH Power consumption in left-on mode (W) Water consumption in litres per year, based on 280 2940 standard cleaning cycles. The actual water con‐ sumption will depend on how the appliance is used Drying efficiency class on a scale from G (least effi‐ cient) to A (most efficient) The ‘standard programme’...
  • Page 26 www.electrolux.com...
  • Page 27 ENGLISH...
  • Page 28 www.electrolux.com/shop...

Table of Contents