Operation; View Data; Take Measurement - Graco Pulse TLM Instructions Manual

Operation

View Data

The TLM can be configured with the Pulse
software to take a reading at predefined
times.
Press and release the display button (A).
Data appears on the display (B) (F
screen lasting a few seconds before going on
to the next.
F . 8 shows the order that the screens
IG
display when taking a measurement.
F . 9, page 10 shows the order that the
IG
screens display when taking a measurement
after a new profile is entered using the Pulse
software.
NOTE: The tank level data can also be
viewed remotely using the Pulse software.
F . 7
IG
3A5411J

Take Measurement

. 7); each
IG
F
IG
B
A
. 8
Operation
9