Troubleshooting
Problem
Monitor will not take reading
when Display button is
pressed.
Weak or no RF signal
12
Cause
Weak or dead batteries.
Batteries are not correctly
seated.
Microprocessor not com-
pletely shut down before
installing new batteries.
Monitor display is cracked.
Changes/obstructions in RF
pathway (i.e., vehicles, over-
head doors, etc.)
Weak or dead batteries
Solution
Replace batteries. See
Replacing Batteries, page
14.
Ensure the batteries fully
engage the mounting clips by
pushing on the bottom of
each battery with your
thumbs.
After you have removed old
batteries, wait 30 seconds to
ensure the microprocessor
has completely shut down,
before installing new batter-
ies.
Replace TLM.
Add Graco Extender to Pulse
System. Order Graco Part No.
17F885 - US/Canada;
17F886 - EU; 17F887 - UK;
17F888 - ANZ.
Replace batteries. See
Replacing Batteries, page
14.
3A5411J