Table of Contents
Advertisement
Warranty Information
Out of Warranty Service
Proceed exactly as for Warranty Service above. If our service department can assist you
by phone or other correspondence, we will be glad to help at no charge.
Repair service will be billed on the basis of labor and materials. A complete statement of
time spent and materials used will be supplied. Shipment to Harvard Apparatus should
be prepaid. Your bill will include return shipment freight charges.
Disassembly by the user is prohibited. Service should only be carried out by
experienced Harvard Apparatus technicians.
Repair Facilities and Parts
Harvard Apparatus stocks replacement and repair parts. When ordering, please describe
parts as completely as possible, preferably using our part numbers. If practical, enclose a
sample photo or drawing.
Safety Precautions
• Always isolate ElectroPrep unit from the power supply before removing the safety
cover. Isolate the power supply from the main first then disconnect the leads
• DO NOT exceed the maximum operating voltage or current.
• DO NOT operate the unit in metal trays.
• Following the replacement of electrodes, have the unit inspected and approved by
your safety officer prior to use.
• DO NOT fill the unit with running buffer above the maximum fill line.
• DO NOT move the unit when it is running
• CAUTION: During use very low quantities of various gases are produced at the
ElectroPrep electrodes. The type of gas produced depends on the composition of
the buffer employed. To disperse these gases, make sure that the apparatus is run
in a well ventilated area.
ElectroPrep System
Publication 9511-073 REV-1.0
3
Advertisement
Table of Contents
