Siemens SIMATIC TI505 386/ATM User Manual page 12

This manual describes installing and using the SIMATIC TI505™
386/ATM Coprocessor Module.
Other Manuals Refer to the manuals listed below for instructions on installing,
programming, and troubleshooting your controller and I/O.
•
•
•
•
•
•
•
•
•
Agency Approvals The 386/ATM Coprocessor Module meets the standards of the following
agencies:
•
•
•
•
Series 505™ products have been developed with consideration of the draft
standard of the International Electrotechnical Commission Committee
proposed standard (IEC-65A/WG6) for programmable controllers.
Telephoning for
If you need information that is not included in this manual, or if you have
Assistance
problems using the Series 505 386/ATM Coprocessor Module, contact your
Siemens Industrial Automation, Inc. distributor or sales office. If you need
assistance in contacting your distributor or sales office in the United States,
call 1–800–964-4114.
386/ATM Coprocessor User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SIMATIC TI505 Programming Reference Manual
SIMATIC TI525™/TI535™ Hardware/Installation Manual
SIMATIC TI545™ System Manual
SIMATIC TI555™ System Manual
SIMATIC TI560T™/TI565T™ System Manual
CVU10000™ Manual Set, Rel. 2.0
CVU100™ Programming Reference Manual
CVU100 Hardware and Installation Manual
The TISOFT™ User Manual for your release of TISOFT
Underwriters Laboratories: UL Listed (Industrial Control Equipment)
Canadian Standards Association: CSA Certified (Process Control
Equipment)
Factory Mutual Approved; Class I, Div. 2 Hazardous Locations
Verband Deutscher Elektrotechniker (VDE) 0160 Clearance/Creepage
for Electrical Equipment (Self-Compliance)
Preface
Preface ix