Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for MasterCraft 054-1252-6
Summary of Contents for MasterCraft 054-1252-6
- Page 1 INSTRUCTION MANUAL HEAT GUN 054-1252-6...
- Page 2 This symbol designates that this tool is listed with Canadian requirements by ETL Testing Laboratories, Inc. Conforms to UL Std. 499. Certified to 3042597 CAN/CSA Std. C22.2 No. 122. JD3932U HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
-
Page 3: Power Tool Safety
WARNING: Use hearing protection, particularly during extended periods of operation of the tool or if the operation is noisy. SAVE THESE INSTRUCTIONS FOR REFERENCE HEAT GUN 054-1252-6 HEAT GUN 054-1252-6... - Page 4 Do not use the tool if the power switch does not turn it ON or OFF. Any tool that cannot be controlled These cords are rated for outdoor use and reduce the risk of electric shock. with the switch is dangerous and must be repaired. SAVE THESE INSTRUCTIONS FOR REFERENCE SAVE THESE INSTRUCTIONS FOR REFERENCE HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
-
Page 5: Specific Safety Rules
Lead- based paint must only be removed by a professional and must not be removed using a heat gun. SAVE THESE INSTRUCTIONS FOR REFERENCE SAVE THESE INSTRUCTIONS FOR REFERENCE HEAT GUN 054-1252-6 HEAT GUN 054-1252-6... -
Page 6: Extension Cord Safety
Never operate the heat gun if the blower motor does not turn ON. Turn the heat gun OFF immediately. Operating the heat gun without the blower motor running will burn the element out. SAVE THESE INSTRUCTIONS FOR REFERENCE HEAT GUN 054-1252-6 HEAT GUN 054-1252-6... - Page 7 ……... Warning symbol ….. Read all safety warnings Description Description and instructions ………. Wear your safety glasses Nozzle Hanging loop ……... Wear hearing protection Stabilizing stand Handle Air vents Trigger switch HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
- Page 8 NOTE: The nozzle must be at least 2” (25 mm) from the surface being heated to permit adequate air flow and to prevent overheating. HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
- Page 9 Never attempt to change or attach a deflector to the heat gun immediately after it has been turned ON. The nozzle will be extremely hot. Always wear gloves when changing or attaching a deflector. HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
- Page 10 Do NOT use the heat gun on any glass surface wall heat gun. such as windows. The rapid expansion may break the glass or damage the seal in thermo pane windows. HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
- Page 11 Lubrication All of the bearings in this heat gun are lubricated with a sufficient amount of high-grade lubricant for the life of the unit under normal conditions. Therefore, no further lubrication is required. HEAT GUN 054-1252-6 HEAT GUN 054-1252-6...
- Page 12 WARNING: When servicing, use only Mastercraft replacement parts. The use of any ® other parts may create a safety hazard or cause damage to the heat gun. Any attempt to repair or replace electrical parts on this heat gun may create a safety hazard unless repairs are performed by a qualified technician.
-
Page 13: Additional Limitations
Mastercraft is a superior line of products selected for their workmanship and materials. These products These warranties are subject to the following conditions and are designed to meet rigorous quality and performance standards, and are approved by our Quality limitations: Assurance laboratory.
Need help?
Do you have a question about the 054-1252-6 and is the answer not in the manual?
Questions and answers