Checking The Sat Radio Id Number; Storing Channel Presets; Receiving Stored Channels; Channel/Category Search Function - Alpine CDA-9847 Owner's Manual

• When using the optional remote control (RUE-4190), a Channel
can be directly called up with the numeric keypad of the remote
control.
1 While in XM or SIRIUS Radio mode, enter the Channel
number you want to call up with the numeric keypad on
the remote control.
2 Press ENTER on the remote control within 5 seconds to
receive the Channel.
If the channel number is 3 digits, the Channel is
automatically received after the channel number is input.

Checking the SAT Radio ID Number

A unique Radio ID number is required to subscribe to SAT Radio
programming. Each third party XM or SIRIUS radio comes with this
number.
XM radio:
The number is an 8-character alphanumeric number, printed on a label
directly on the XM Receiver.
SIRIUS radio:
The number is a 12-character alphanumeric number.
It can also be displayed on the screen of the CDA-9847 in the
following way.
1
While receiving band, press g or f to select
channel "0."
The unit alternately displays "RADIO ID" for 2 seconds,
then the ID number for 10 seconds.
While displaying "RADIO ID" as shown above,
Demonstration (page 17) become nonfunctional.
2
To cancel the ID number display, change the
channel.
• You cannot use "O," "S,"" I," or "F" for the ID Number (XM
radio Receiver only).
• You can check the ID number printed on a label on your third
party, SAT Radio Receiver package.

Storing Channel Presets

1
Press BAND to select the desired band you want
to store.
2
After tuning in the desired channel, press and hold,
for at least 2 seconds, any one of the preset
buttons (1 through 6) into which you wish to
store the channel.
The selected station is stored.
3
Repeat the procedure to store up to 5 other
channels onto the same band.
• To use this procedure for other bands, simply select the band
desired and repeat the procedure.
• A total of 18 channels can be stored in the preset memory (6
channels for each band; XM1, XM2 and XM3 or SR1, SR2 and
SR3).
• If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.

Receiving Stored Channels

1
Press BAND to select the desired band.
2
Press the channel preset button that has your
desired satellite channel in memory.

Channel/Category Search Function

You can search for programs by Channel No. or Category.
1
Press SEARCH/Q.S.
to select Channel Search mode or Category Search
mode.
Channel Search mode:
2
Turn the Rotary encoder to select the desired
Channel No.* within 10 seconds.
* The Channel No. is selected within the selected Category.
3
Press Rotary encoder to receive the selected
Channel No.
• Search mode is canceled by pressing and holding SEARCH/Q.S.
at least 2 seconds in Channel Search mode.
• While in Channel Search mode, press 8 or 9 to select the another
Category.
• While in Channel Search mode, press SEARCH/Q.S.
to the Category Search mode.
Category Search mode:
2
Turn the Rotary encoder to select the desired
Category within 10 seconds.
3
Press Rotary encoder to receive the selected
Category.
• Search mode is canceled by pressing and holding SEARCH/Q.S.
at least 2 seconds in Category Search mode.
• While in Category Search mode, press SEARCH/Q.S.
to Channel Search mode.
in the XM or SIRIUS mode
for
to switch
for
to switch
19
-EN