Alpine CDA-9847 Owner's Manual page 27

Indication for SAT Receiver Mode
ANTENNA
• The XM or SIRIUS antenna is not connected to the XM or
SIRIUS radio module.
- Check whether the XM or SIRIUS antenna cable is attached
securely to the XM or SIRIUS radio module.
UPDATING (XM mode)
CALL 888-539-
(SIRIUS mode)
SIRIUS TO
Scrolling display
SUBSCRIBE
• Radio is being updated with latest encryption code.
- Wait until encryption code is being updated. Channels
0 and 1 should function normally.
(XM mode)
NO SIGNAL
ACQUIRING
(SIRIUS mode)
SIGNAL Scrolling display
• XM or SIRIUS signal is too weak at the current location.
- Wait until the car reaches a location with a stronger signal.
LOADING
(XM mode)
ACQUIRING
(SIRIUS mode)
Scrolling display
SIGNAL
• Radio is acquiring audio or program information.
- Wait until the radio has received the information.
OFF AIR
(XM mode)
ACQUIRING
(SIRIUS mode)
SIGNAL
Scrolling display
• The channel currently selected has stopped broadcasting.
- Select another channel.
– – – – – – – –
• The user has selected a channel number that does not exist or
is not subscribed to.
- The unit will revert back to the previously selected channel.
• There is no artist name/feature, song/program title, or
additional information associated with the channel at that time.
- No action needed.
26
-EN
Indication for iPod Mode
NO IPOD
• The iPod is not connected.
- Make sure the iPod is correctly connected.
Make sure the cable is not bent excessively.
• The iPod's battery remains low.
- Refer to the iPod's documentation and charge the battery.
NO FILE
• There are no songs in the iPod.
- Download songs to the iPod and connect to the CDA-9847.
ERROR-01
• Communication error
- Turn the ignition key off, and then set to ACC or ON again.
- Check the display by reconnecting between the iPod and the
adapter, using the iPod cable.
ERROR-02
• Caused by the iPod Software Version not being compatible
with the optional adapter KCA-420i.
- Refer to the Owner's Manual of the optional adapter KCA-
420i, and update the iPod Software Version to be compatible
with the optional adapter KCA-420i.