Titling Discs/Stations - Alpine CDA-9847 Owner's Manual

About the indicator display
When displaying Title/Text, the following indicators are lit
according to the mode.
Bass Level is usually displayed. When BBE is set,
the display changes according to the BBE setting.
Indicator/
CD Mode
Mode
Title displayed
—
—
—
Text displayed
(Disc Name)
Text displayed
(Track Name)
∗1
Tag information
∗2
When SAT Radio mode is activated.
About "Title" and "Text"
Title:
With this device, it is possible to input the CD and radio
station name (page 15). This inputted name is referred to as a
"title."
You cannot input or display titles on MP3/WMA discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
"text."
• Some characters may not be displayed correctly with this device,
depending on the character type.
• When the Scroll Setting (page 17) is set to "SCROLL MANU,"
press and hold TITLE for at least 2 seconds to scroll the Text
information only once (TEXT DISPLAY, FOLDER NAME
DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode).
• "NO SUPPORT" is displayed when the desired text information
cannot be displayed on this unit.
• If the title was not previously input, "NO TITLE" is displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
MP3/WMA Mode TUNER Mode
— —
Folder Name
—
displayed
File Name
—
displayed
Artist Name Artist Name
displayed ∗ displayed ∗
1 2
Album Name
displayed ∗
—
1
• Title displayed
Track Name
• Music Title/
displayed ∗
1
Channel Name
displayed ∗
2

Titling Discs/Stations

It is possible to title your favorite CD's or radio stations.
You cannot input titles for MP3/WMA discs.
1
Press TITLE
and select the Title Display.
For details, see "Displaying the Title/Text" (page 14).
2
Press and hold TITLE
The first character will blink.
3
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
4
Press the Rotary encoder to store the first
character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
• You can enter 18 CD titles and 24 station titles on this unit. If you
try to store beyond the limit, the display will show "FULL DATA."
At this point, no more titles can be stored. To input a new title, one
of the previously inputted titles must first be deleted.
• When you want to erase a title, enter the "
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.
for at least 2 seconds.
" symbol into all
15
-EN