Net World Sports RAPIDFIRE Manual

1.5m x 1.8m

Advertisement

To attach net

4
first fit the net to the bottom of the frame.
Attach the rest of the net using bungee ties
ensuring they are spread around the frame evenly
Adjust the angle of the Rebounder using the adjuster
5
screw on the back strut ( part 6 and 7)
Always inspect frame and net for defects before use and repair damaged parts.
i
Do not use frame with faulty parts.
Never climb on the net or frame.
Please adhere to safety instructions at all times.
@NetWorldSports
www.networldsports.co.uk // +44 (0) 1691 683 807 // cs@networldsports.co.uk
www.networldsports.com // 1-866-861-9095 // cs@networldsports.com
1.5m x 1.8m

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RAPIDFIRE and is the answer not in the manual?

Questions and answers

Summary of Contents for Net World Sports RAPIDFIRE

  • Page 1 To attach net first fit the net to the bottom of the frame. Attach the rest of the net using bungee ties ensuring they are spread around the frame evenly 1.5m x 1.8m Adjust the angle of the Rebounder using the adjuster screw on the back strut ( part 6 and 7) Always inspect frame and net for defects before use and repair damaged parts.
  • Page 2 Parts list Lay out the parts and check they are correct and there are no defects. Assemble the frame according to the diagram below, tighten the nuts with the spanner and allen key provided. (26mm dia) ITEM ITEM fit net bolts through each hole in the frame with the orange spacer on the out side of the frame.

Table of Contents