Net World Sports RAPIDFIRE FLASH ELITE Instructions

Pop up rebounder

Please read through the instructions carefully

before assembly.

Please check all components are present

and have no defects.

This product should be assembled by an adult.

Check the product is fully and correctly assembled

before use.

Always inspect frame and net for defects before use and repair or replace damaged parts.

Do not use frame with faulty parts.

Please adhere to safety instructions at all times.

www.networldsports.co.uk / / +44 (0) 1691 683 807 / / cs@networldsports.co.uk

www.networldsports.com / / 1-866-861-9095 / / cs@networldsports.com

Ensure product is anchored to the ground before use.

This product is not suitable for use in high winds.

Once assembled the product is under tension, please

take care when disassembling.

Never climb or swing on the poles or net.

This product is not a toy, serious injury can occur

if misused.

@NetWorldSports

FLASH ELITE - POP UP REBOUNDER

Table of Contents

Need help?

Do you have a question about the RAPIDFIRE FLASH ELITE and is the answer not in the manual?

Page 1 FLASH ELITE - POP UP REBOUNDER Ensure product is anchored to the ground before use. Please read through the instructions carefully before assembly. This product is not suitable for use in high winds. Please check all components are present Once assembled the product is under tension, please and have no defects.
Page 2 Parts list Assemble the frame using parts 1 to 7 ITEM Secure part 4 to the frame using securing pin Assemble and ﬁt large tension rods. Large tension Smal tension Large net Small net U peg...
Page 3 Thread small tension rods through sleeves on the side of small net Hook the top corners over the tension rods. You will need to bend and locate rods into part 4. Once complete, hook loops on the top one of the rods to hook the last corner. corners of the net to the poles and clip net to the frame.