Net World Sports Forza 8 x 6 STEEL42 Manual

Advertisement

Place the net over the frame. The NWS label indicates the top of the net,
6
ensure this is at the top of the crossbar. Align the side seams with the back
bars so that the net sits comfortably over the goal.
Starting with the top corners, fit the net by wrapping it around the posts and
7
clipping to the inside using the bungie ties provided. Attach Bungees equally
along the length of the net.
Anchor the goal using the provided U-pegs ensuring posts are upright and
8
the crossbar is level. The U-pegs fit around the base and push into the
ground to keep the goal steady.
www.youtube.com/networldsports
Always Inspect goal post and net for defects before use and repair damaged parts in accordance with BS
i
8461:2005 code of practice.
Do not use goal with faulty parts.
The goal must always be secured to the ground. Weights to be used on hard surfaces, ground anchors on grass.
Never climb on the net or goal frame. The goal must never be used without the net fitted.
Please adhere to safety instructions at all times.
CAUTION: it is recommneded that a minimum of 2 people assemble this product.

Additional Information

When the goal is not being used dismantle and store under cover.
This goal conforms with BS8462:2005.
Not suitable for children under 3 years.
It is recommended that the goal is assembled by an adult.
Warranty excludes net.
Please see forzagoal.com/forza-goal-instructions for more details.
www.networldsports.co.uk // +44 (0) 1691 683 807 // cs@networld-sports.co.uk
www.networldsports.com // 1-866-861-9095 // cs@networld-sports.com
@NetWorldSports
8 x 6 STEEL42
9a
8
1a
2
16a
4
3
1a
1b
2
3
4
6
PART
7
x3
x2
x2
QTY
x1
x1
x4
x2
2
6
1b
9b
7
4
6
2
4
3
BUNGEE
8
9a
9b
16a
16b
U-PEGS
NET
TIES
x1
x1
x1
x1
x1 PCK x1 PCK
x1
x1
16b

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Forza 8 x 6 STEEL42 and is the answer not in the manual?

Questions and answers

Summary of Contents for Net World Sports Forza 8 x 6 STEEL42

  • Page 1 Place the net over the frame. The NWS label indicates the top of the net, ensure this is at the top of the crossbar. Align the side seams with the back bars so that the net sits comfortably over the goal. 8 x 6 STEEL42 Starting with the top corners, fit the net by wrapping it around the posts and clipping to the inside using the bungie ties provided.
  • Page 2 Assemble the top of the goal frame using parts 1a, 1b, 2, 6, 8, 9a & 9b Lay out all components and ensure that they match the parts list. Assemble the base, using parts 3, 4, 6, 16a & 16b. Attach the top of the goal frame to the uprights and backbars.

Table of Contents