Time: Does This Station Have Atomic Time; How Do I Manually Set The Time - La Crosse 328-1414BW Faqs

• 24 Hour Rainfall
• Outdoor HI Temperature
• Outdoor LO Temperature
• Outdoor HI Humidity
• Outdoor LO Humidity
• Indoor HI Temperature
• Indoor LO Temperature
• Indoor HI Humidity
• Indoor LO Humidity
1. Hold the ALERTS button 2 seconds to enter Alert Settings. (ALERT OFF and Alert Type will
show for selected area)
2. Press and release the + or – button to turn alert ON
3. When the alert is ON, the alert value is flashing. Use the + or – buttons to set.
4. Hold the + or – buttons to scroll quickly.
5. Press and release ALERTS button to move to next item.
6. Leave an alert OFF (disarmed) and press the ALERTS button to skip setting that alert value
7. The alert icon will show when the alert is active.
8. When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. (1 second beep once, sound for 5 seconds, wait 55 seconds and then repeat began
to ring for 5 seconds.)
9. The flashing Alert Icon will indicate if it is a LO or HI alert.
10. Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.

TIME: DOES THIS STATION HAVE ATOMIC TIME?

Yes:
• The station will only search for the atomic signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• If there is no WWVB reception, the station will search for the atomic time signal every 2
hours until the WWVB time is received.
• The Atomic Time Signal Icon (Tower) will flash while searching. The tower icon will be solid
when it has connected.
• From normal time display, press and release the SET button to manually search for the
WWVB time signal.
• The entire Atomic icon will flash when searching. No signal strength indication.
1. Hold the SET button 2 seconds to enter settings mode.
2. Press the + or - button to adjust the flashing values.
3. Hold the + or - button to adjust quickly.
4. Press the SET button to confirm adjustments and move to the next item.
5. Press the ALERTS button at any time to exit.

HOW DO I MANUALLY SET THE TIME?

9 | P a g e