How Do I Reset The Temperature/Humidity Readings; How Often Does My Temp/Humidty Sensor Update; What Is Feels Like And Dew Point Temperature - La Crosse 328-1414BW Faqs

HOW DO I RESET THE TEMPERATURE/HUMIDITY READINGS?

Your temperature and humidity readings are reset individually.
1. Press and release the TEMP button to view the reading you wish to reset.
2. Hold the MINUS (-) button for 5 seconds to reset individual temperature or humidity value to
current temperature, humidity, time and date.
3. Press and release the LIGHT button to exit.

HOW OFTEN DOES MY TEMP/HUMIDTY SENSOR UPDATE?

• Your Wind/TH Sensor checks for any change every 31 seconds.
• Any change of +/- 0.5°C, or Hum +/- 2% RH will cause the sensor to send a reading.
• If there is no change in temperature or humidity, the sensor will transmit every 3 minutes to
preserve battery life.

WHAT IS FEELS LIKE AND DEW POINT TEMPERATURE?

Feels Like temperature indicates both Wind Chill and Heat index on stations with wind speed
• Feels Like Temperature shows Wind Chill: When the temperature is below 50°F, and
generally a 5 mph sustained wind speed, the Feels like Temperature is showing Wind Chill.
• Feels Like temperature shows Heat Index: When the temperature is above 80°F, the Feels
like temperature is showing the Heat Index.
• Feels Like temperature shows Current Temperature: When temperature is between 51°F
and 80°F, the Feels like temperature will remain the same as the outdoor temperature
regardless of humidity or wind speed.
HI ALERT LO ALERT
Important:
• Alerts are defaulted to be OFF.
• The alerts menu is in the order listed below.
• When alert is ON, the alert value flashes to be set. No additional button press required.
• Leave an alert OFF (disarmed) press the ALERT button to skip setting that alert value.
• The HI or LO alert icon will show when the alert is active.
• When armed alert value is reached, station will beep 5 times each minute, until out of alert
range. The flashing alert icon will indicate it is a LO or HI alert.
• Press any button to stop the temp alert sound. The alert icon will flash while value is in alert
range.
Alert Setting Order:
• High Wind Speed Value 0-111.8 (0-178kmh)
8 | P a g e