Advertisement
(cat. no. 1771-P4S, -P6S, -P4S1, -P6S1)
This document provides you with the following information:
When you receive your power supply, you should see the following
components in the box:
To install your power supply, you need to know how to perform the
following tasks:
Each power supply module has two jumpers located at the back edge of the
module near the gold-plated edge connectors. The jumper selection
provides the proper voltage regulation for the different power supply
configurations. The power supply can be configured to support local or
remote sensing by setting the jumpers.
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
what this package contains
tasks on installing your power supply module
interpreting the power supply indicators
troubleshooting your power supply
one 1771-P4S, -P6S, -P4S1, or -P6S1 power supply module
one 5-position terminal block (attached to module)
set the jumpers
place the power supply in a chassis
connect a paralleling cable (if using a second supply)
connect input power
1
Advertisement
