Eaton CROUSE-HINDS Series Instruction Manual page 8

4
4 .4 Removal from DIN-rail
To remove the F10x from the DIN-rail, use a screwdriver to release the DIN-rail latching
mechanism. Pivot the F10x and remove from the DIN-rail.
5 ELECTRICAL CONNECTIONS
The Input power and Fieldbus Segment connectors are pluggable and available in a
screw terminal version (-PS) or a spring clamp version (-PC). See Figures 5a & 5b. The
terminals can accept the following conductor sizes:
Type
Screw terminals (-PS)
Spring clamp terminals (-PC)
Figure 5a: Screw Terminal
When wiring to spring-clamp terminals use a screwdriver with a 3-4 mm blade
and depress the spring-clamp button (orange) before inserting the termination
Figure 4b
Conductor size
0.14 to 2.5mm
2
0.2 to 2.5mm
2
Figure 5b: Spring Clamp
NOTE
cable. See Figure 5b.
INM F10x Rev 1