Reset All Setup Executing Menu (M49) - Sony DNW-A220 Maintenance Manual

3-5. Setup Maintenance Mode (M4)

3-5-3. RESET ALL SETUP Executing Menu (M49)

3-5-3. RESET ALL SETUP Executing Menu (M49)
Reset the following settings to the factory setting at once.
. All "current" and "bank" in the setup menu
For 525/60 system : current, bank1, bank2, bank3, bank4
For 625/50 system : current, bank1, bank2, bank3, bank4
. ITEM-013 : 525/625 SYSTEM SELECT in the setup menu
. M40 : EXTENDED MENU in the maintenance mode
To execute
(1) Turn the JOG dial while pressing the search button, and move the * mark to ON.
. The message "All the System Setup data will be changed to Factory default."
is displayed on the LCD monitor.
(2) Press the SET button.
. The message "Executing..." is displayed on the LCD monitor during changing
the setting.
(3) Check that the setting change is completed.
. After the setting change is completed, the message "Complete" "Turn off/on
POWER!!" is displayed on the LCD monitor .
(4) Turn off the power.
(5) Turn on the power again.
3-62
Example of display
and operation
SETUP MAITENANCE MODE
M49 : RESET ALL SETUP
*
OFF
0 [Search] + DIAL(2)
(1)
SETUP MAITENANCE MODE
M49 : RESET ALL SETUP
*
ON
Push SET Button
------ Caution ------
All the System Setup
data will be changed
to Factory default.
0 [SET]
(2)
SETUP MAITENANCE MODE
M49 : RESET ALL SETUP
*
ON
Executing...
------ Caution ------
All the System Setup
data will be changed
to Factory default.
0 Confirm
(3)
SETUP MAITENANCE MODE
M49 : RESET ALL SETUP
*
ON
Complete
Turn off/on POWER!!
0 Turn OFF the power
(4)
0 Turn ON the power
(5)
DNW-A220P
DNW-A220