3-2. TAPE Maintenance Mode (M0)
3-2-1. Overviews
A2 : AUDIO/VIDEO ADJUST
This submode is used to adjust the audio and video systems.
For more details, refer to maintenance manual part 2 volume 1.
AUDIO/VIDEO ADJUST MODE
*
A20:VPR/TG VR
A23:SDI VR
A24:INPUT CF DETECT
A25:DEC VR
A26:DEC VR (LOOP)
A2F:NV-RAM CONTROL
Title
A20 : VPR/TG VR
A23 : SDI VR
A231 : SDI ENC VCO
A232 : SDI DEC VCO
A24 : INPUT CF DETECT
A25 : DEC VR
A26 : DEC VR (LOOP)
A27 : VIDEO METER
A2F : NV-RAM CONTROL
3-12
Page
Description
—
Adjusts the reference signal system and analog video output system
on the VPR-34 and TG-191/191P boards.
—
Adjusts the SDI input/output interface.
—
Automatically adjusts the SDI output interface.
—
Automatically adjusts the SDI input interface.
—
Automatically adjusts the color frame detection timing of a composite
video input.
—
Adjusts the composite video input system.
—
Adjusts the composite video input (in the multi-loop state).
—
Calibration of video meter on the sub LCD.
—
Saves the adjustment data in audio and video systems.
DNW-A220
DNW-A220P