Component Replacement; Exchanging / Installing The Backlight - Epson RC+ 7.0 Manual

Hide thumbs Also See for RC+ 7.0:

Table of Contents

4.3 Component replacement

For a list of the components which can be replaced directly by the customer, please contact

the supplier of your region. For any other repair, the product must be returned to the

manufacturer.

Material needed:

Step 1

Unscrew the 7 screws on both sides (A) and (A') and remove the two side covers Use a

Torx key size 10.

Step 2

On both sides, unscrew the four bolts (B). Use a flat wrench size 5.5.

Part Feeding 7.0 IF-240 Rev.5

For any kind of replacement, always use Epson products.

WARNING

Be sure that all power sources and other cables to the unit are

disconnected before changing the backlight.

DANGER

New backlight assembly ordered from the supplier of your region.

(Please ask part code to the supplier.)

Flat wrench size 5.5

Torx key size 10

4. Maintenance and component replacement

Table of Contents

Part feeding 7.0 If-240