Safety Precautions; General Safety Precaution - Epson RC+ 7.0 Manual

1. Introduction

1.2 Safety precautions

1.2.1 General safety precaution

1.2.1.1 Transport
1.2.1.2 General
4
Be aware of the weight and take care when transporting the
system. For more information, please refer to 3. Transportation
handling and installation.
DANGER
Be sure that all power sources and other cables to the unit are
disconnected before working on the product.
DANGER
Only qualified personnel (trained by Epson and with
professional experience) are authorized to work on this device.
DANGER
Do not access the housing of the system controls. Serious
injury or death could result from electric shock.
authorized personnel from Epson are allowed to access this
part of the system for maintenance or for repair.
DANGER
Do not plug or unplug cables of the system unless it is switched
off.
DANGER
Never modify the product. Unauthorized modification may
cause the product to malfunction, resulting in injury, electric
shock, fire, etc.
DANGER
Turn off the power to the product in the event of power failure.
Failure to do so may cause the product to suddenly start
moving when the power is restored.
DANGER
Do not use the product in a place where it may come in contact
with water or oil droplets.
DANGER
Part Feeding 7.0 IF-240 Rev.5
Only