Page 1
* Power Factor Regulator DIGITAL MULTIMETER * Earth Resistance Tester * Digital Panel Meters * DC Power Supplies * High Voltage Detector MODEL - KM 822sEX * Calibrators * Gas Analysers * Frequency Counter * Function Generator * Phasing Sticks...
20A. Next, connect the test leads before you apply power to the circuit. To be 10.WARRANTY..............24 safe, start by setting your meter to its highest range first. “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
V / mA A A : Category IV 1000VAC & VDC probes for damaged insulation or exposed metal before using the instrument. If any defects are found, replace them immediately. -01- -02- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
2006/95/EC and Electromagnetic compatibility directive Ex ib falls under Zone 1 which is an area where flammable gas can 2004 /108 / EC occur in normal operating conditions. -03- -04- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
& Carrying Case. CAN/CSA C22.2 No. 61010.1-0.92 to Optional accessories : USB interface kit BU-86X; B MH-01 Category IV 1000Vac & Vdc. Magnetic Hanger. Transient protection : 12kV (1.2/50ms surge) -05- -06- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
0.1 mV Input Impedance : 10M, 50pF nominal 9.999 (80pF nominal for mV ranges) ±(1.0% rdg + 4 dgts) 99.99 ±(2.0% rdg + 4 dgts) 999.9 100 mV -07- -08- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
Page 7
600.0 mA 6.000 0.001 A ±(0.8%rdg + 6dgts) 0.02V / A 10.00 0.01 10A continuous, > 10A to 20A for 30 second max with 5 minutes cool down interval -09- -10- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
Page 8
AC 60.00mA 40mA 15.00 ~ 3.000kHz Specified accuracy adds 250 digits for changes > 1.0ms AC 600.0mA 60mA in duration AC 6.000A AC 10.00A Accuracy : 0.04% + 4d -11- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
1000V CATIV MAX 10A HBC FUSED functions waveforms such as: square, sawtooth, triangle, pulse trains, KM 822sEX 7) Input Jack for milli-amp spikes, as well as distorted waveforms with the presence of & micro-amp current harmonics. Harmonics may cause :...
MAX 10A HBC FUSED 1000V CATIV HBC FUSED HBC FUSED KM 822sEX KM 822sEX diode is between 0.400V to 0.900V. A reading higher than that indicates a leaky diode (defective). A zero reading indicates a shorted diode (defective). An OL indicates an open diode CAUTION (defective).
Page 11
HBC FUSED 1000V CATIV MAX 10A HBC FUSED 1000V CATIV MAX 10A HBC FUSED 1000V CATIV HBC FUSED HBC FUSED HBC FUSED KM 829 KM 829 KM 829 -17- -18- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
Page 12
OFF and then back on to resume. ranges. Press and hold the button for 1 second or more to resume auto-ranging. Note : Manual ranging feature is not available in Hz function. -20- -19- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
(near the LCD side) are engaged. Re -fasten the screws. circuit. The series fusible resistors and the spark gaps should then be replaced by qualified technician. Refer to the WARRANTY section for obtaining warranty or repairing service. -21- -22- “KUSAM-MECO” AN ISO 9001:2015 COMPANY “KUSAM-MECO” AN ISO 9001:2015 COMPANY...
WARRANTY MUMBAI Each “KUSAM-MECO” product is warranted to be free from defects in TEST CERTIFICATE material and workmanship under normal use & service. The warranty period is one year (12 months) and begins from the date of despatch of goods. In case any defect occurs in functioning of the instrument, under...
Need help?
Do you have a question about the KM 822sEX and is the answer not in the manual?
Questions and answers