Table of Contents
Advertisement
Super Firmware Update and Recovery for the X12MP/X12DP/X12SP/B12/H12/BH12 Motherboards User's Guide
1.4.2 Selecting an Image File for Firmware (CPLD) Update
Follow the steps below to select an image file to update your Complex Programmable Logic
Device (CPLD) to a desired firmware version.
1. Click Select File
stored in the hard drives of the local machine which you use to update the CPLD
firmware for the remote server.
2. From the screen as shown above, select the file that you want to use for your CPLD
2a
update
and click Open
3. The file you've selected will appear on the Select File field
4. To de-select the file that you've just chosen for CPLD update, click Cancel
allow you to select another file to update your CPLD firmware.
5. Once you've finalized your selection, click Upload
selected image file.
6. A warning will display asking you to power off the system for CPLD update. Click Power
Off as shown below.
1
1
to browse the files that are available to you, including the files
2b
.
3
5
2a
3
as shown below.
4
to update your CPLD using the
5
16
2b
which will
4
Advertisement
Table of Contents
