Example Of Data Communication On The Sample Screen - Mitsubishi MELSEC-Q Series User Manual

4 VERIFYING THE OPERATION OF THE WEB FUNCTION USING
A SAMPLE SCREEN

4.4 Example of Data Communication on the Sample Screen

4 - 3
The following shows how to access a QCPU using the sample screen.
(1) System configuration
The following shows a system configuration for data communication.
(Explanation of proxy setting is omitted.)
Network No.1
Ethernet module
[10.97.85.200]
Station number: 1
(2) Execution environment for the above data communication example
(Ethernet module side)
(a) Mount an Ethernet module to slot 0 of the basic base unit.
(b) Set the parameters for Ethernet using GX Developer.
For the setting items other than shown below, the default values will be
used.
1) Network parameters
Network parameters setting the number of
Ethernet/CC IE/MELSECNET cards
Operational settings
2) Remote password
Setting screen
Remote password settings
Remote password detail settings
(c) Write data to the data registers D0 through D3.
(d) Write the Ethernet parameters and programs to the programmable
controller CPU and restart the programmable controller CPU.
When it is operating normally, the initial processing of the Ethernet module
will be completed normally and the [INIT. ] LED will be lit.
Web server
[10.97.85.10]
Setting screen
Password setting
Password active module settings
System connection
MELSEC-Q
Web browser
[10.97.85.201]
Setting item
Network type
Starting I/O No.
Network No.
Group No.
Station No.
IP address [10. 97. 85. 200]
Setting item
Model name
Start X/Y
Setting data
Ethernet
0000
1
1
1
Setting data
QJ71E71
0000
Check "HTTP port."
4 - 3