Table of Contents
Advertisement
Size [mm]
3001 SIL
A
120
B
340
C
158
D
460
E
628
F
1756
G
343
H
4.1 Environmental conditions
Working temperature
Storage temperature
Transport temperature
Operating height
Air humidity (at 40 °C)
Working environment
Lighting
4.2 Type plate
Fig. 2: Type plate of the floor jack SRWH 3002 EF
SRWH-Series | Version 1.01
3002 EF
95
425
150
520
690
1840
370
285
Conditions
-5°C to +40°C
-25°C to +55°C
-25 °C to +70 °C (< 24 h)
max. 1000 m
max. 85% relative
humidity
not flammable, dry and
durst-free
> 300 LUX
5
Transport, packaging, storage
5.1 Transport
Check the floor jack on delivery for any visible trans-por-
tation damage. If you notice any damage to the device
please report this immediately to the carrier or dealer.
NOTE!
The floor jack should be protected from humidity.
5.2 Packaging
All used packaging materials and packaging aids are
recyclable and should be taken to a materials recycling
depot to be disposed of.
The delivery packaging is made of cardboard, so
please dispose carefully by having it chopped up and
given to the recycling collection.
The film is made of polyethylene (PE) and the cushioned
parts of polystyrene (PS). Deliver these substances to a
collection point for recyclable materials or to the waste
disposal company which looks after your region.
5.3 Storage
The floor jack should be lubricated and then stored in a
dry, frost-free environment.
Only store the floor jack with the lift arm lowered and the
drain valve closed. Do not put anything on the floor jack.
Transport, packaging, storage
7
Advertisement
Table of Contents
