Table of Contents
Advertisement
12 Disposal, recycling of used devices
Please take care in your own interest and in the interest of
the environment that all component parts of the machine
are only disposed of in the intended and permitted way.
12.1 Decommissioning
Immediately decommission used machines in order to
avoid later misuse and endangering of the envi-ronment
or of persons.
Step 1: Eliminate all environmentally hazardous operat-
ing materials from the used device.
Step 2: If required, disassemble the machine into easy-
to-handle and usable components and parts.
Step 3: Dispose of machine components and operating
materials by the disposal channels provided.
12.2 Disposal of lubricants
Remove any leaking, used or excessive grease at the lu-
bricatingpoints.
The disposal instructions for the lubricants used are pro-
vided by the lubricant manufacturer. If necessary, ask
for the productspecific data sheets.
13 Spare parts
DANGER!
Risk of injury due to the use
of wrong spare parts!
Dangers may result for the user and damages as
well as malfunctions may be caused by using wrong
or damaged spare parts.
- Only use original spare parts of the manufacturer or
spare parts admitted by the manufacturer.
- Always contact the manufacturer in case of uncer-
tainties.
Tips and recommendations
The manufacturer's warranty will become null and
void if non-permissible spare parts are being used
SRWH-Series | Version 1.01
Disposal, recycling of used devices
13.1 Ordering spare parts
The spare parts may be purchased with the authorised
dealer or directly with the manufacturer. Please find the
corresponding contact data in Chapter 1.2 Customer
service.
Indicate the following basic information for requests or
orders of spare parts:
- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
You will find information regarding the device type, item
No. and year of construction on the type plate which is
fixed on the device.
Example
The pump for the SRWH 3002 EF floor jack must be or-
dered. The pump has number 28 in the spare parts dra-
wing 1.
When ordering spare parts, please send a copy of the
spare parts drawing (1) with the marked component
(pump) and marked position number (28) to the authori-
sed dealer or to the spare parts department and provide
the following information:
- Type of device: Special Floor Jack SRWH 3002 EF
- Item number:
6201122
- Drawing number: 1
- Position number: 28
The item number of your device:
Special Floor Jack SRWH 3001 SIL: 6201121
Special Floor Jackr SRWH 3002 EF: 6201122
The following drawings are intended to identify the re-
quired spare parts in the event of service.
13
Advertisement
Table of Contents
