Table of Contents
Advertisement
Description of the device
6
Description of the device
6
Fig. 3: Description of the floor jack SRWH 3002 EF
1 Pump lever
2 Tool tray
3 Type plate
4 Lifting arm
5 Swivel castor
6 Jack saddle
Illustrations in this manual may differ from the original.
7
Mounting
Use protective gloves!
Wear safety boots!
Wear protective clothes!
CAUTION!
Risk of crushing!
Injuries ti hand and fingers may result from impro-
per use of the floor jack.
8
1
Fig. 4: Delivery of SRWH 3002 EF
1 Pump lever handle
2 Pump lever extension
3 Jack body
4 Operating Instructionsg
2
3
4
5
Fig. 5: Assembly of the pump lever
Step 1: Unscrew the screw on the underside of the
pump lever handle (SRWH 3001 SIL model
only), place the pump lever handle on the pump
lever extension and screw the two pump lever
parts together with the screw (SRWH 3001 SIL
model only).
Fig. 6: Mounting the pump lever on the jack body
Step 2: The pump lever socket is fixed in the lower posi-
tion with a plastic block for transport. Remove
the plastic block before assembly. To do this, in-
sert the pump lever into the socket and push the
socket downwards.
Unscrew screw B until it no longer projects into
the socket.
Then insert the pump lever completely into the
socket and tighten it with screw B in the socket.
Step 3: Check that the pump lever can be moved freely
and easily.
SRWH-Series | Version 1.01
Advertisement
Table of Contents
