Introduction; Copyright; Customer Service; Limitation Of Liability - unicraft SRWH 3001 SIL Operating Instructions Manual

1

Introduction

You have made a good choice by purchasing the UNI-
CRAFT floor jack.
Read the operating manual thoroughly before commis-
sioning the machine.
It gives you information about the proper commissio-
ning, intended use and safe and efficient operation and
main-tenance of your floor jack.
The operating manual is part of the floor jack package.
Always keep this operating manual in the location where
your floor jack is being operated. All local accident pre-
vention regulations and general safety instructions for
the operating range of your floor jack must also be com-
plied with.

1.1 Copyright

The contents of these instructions are copyright. They
may be used in conjunction with the operation of the
floor jack. Any application beyond those described is
not permitted without the written approval of Stürmer
GmbH.
For the protection of our products, we shall register tra-
demark, patent and design rights, as this is possible in
individual cases. We strongly oppose any infringement
of our intellectual property.

1.2 Customer service

Please contact your dealer if you have questions con-
cerning your floor jack or if you need technical advice.
They will help you with specialist information and expert
advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0049 (0) 951 96555-111
E-Mail: service@stuermer-maschinen.de
Spare part orders:
Fax: 0049 (0) 951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application-which
then could be shared and be valuable to develop our
products even further.
SRWH-Series | Version 1.01

1.3 Limitation of liability

All information and notes in these operating instructions
were summarised while taking applicable standards
and rules, the state-of-the-art technology and our long-
term knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of untrained staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the ex-
pla-nations and presentations described here in case of
spe-cial models, when using additional ordering options
or due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-
tions of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2

Safety

This section provides an overview of all important safety
packages for the protection of operating personnel as
well as for safe and fault-free operation. Other task-ba-
sed safety notes are included in the paragraphs of the
individual phases of life.

2.1 Symbol explanation

Safety instructions
The safety notes in these operating instructions are
high-lighted by symbols. The safety notes are intro-
duced by signal words which express the concern of
the risk.
s
DANGER!
This combination of symbol and signal words indi-
cates an imminently dangerous situation which may
lead to death or severe injuries if they are not avoided.
WARNING!
This combination of symbol and signal words indi-
cates a possibly dangerous situation which may
lead to death or severe injuries if they are not avoi-
ded.
Introduction
3