Crestron DigitalMedia DM-MD64X64 Getting Started

DM-MD64X64 and DM-MD128X128
DigitalMedia™ Switchers
Getting Started
Scan the QR code to view the Quick Start Guide.
www.crestron.com/docs/7328
For additional information about the
DM-MD64X64, visit
www.crestron.com/model/6509961.
For additional information about the
DM-MD128X128, visit
www.crestron.com/model/6509962.

Certification and Compliance

Regulatory Models: DM-MD64X64, DM-MD128X128
Federal Communications Commission (FCC)
Compliance Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
CAUTION: Changes or modifications not expressly
approved by the manufacturer responsible for
compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment
is operated in a commercial environment. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may
cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be required
to correct the interference at his own expense.
Industry Canada (IC) Compliance Statement
CAN ICES-3 (A)/NMB-3(A)
As of the date of manufacture, the product has
been tested and found to comply with
specifications for CE marking.
This product is Listed to applicable UL® Standards
and requirements tested by Underwriters
Laboratories Inc.
Ce produit est homologué selon les normes et les
exigences UL applicables par Underwriters
Laboratories Inc.
DocType - 8678A
(2055428)
02.20