Chapter 2
Setup:
Internet Router
This Chapter explains how to install and configure the Internet
Router for Internet Access.
Overview
Setup involves:
•
Hardware Installation
•
Internet Router configuration
•
PC configuration
Hardware Installation
1. Connect Network Cables
• Use standard UTP network cable, with RJ45 connectors, to connect the ISDN
Internet Router to a 10BaseT or 100BaseT hub.
• The ISDN Internet Router will auto-detect the network speed (10M or 100M)
and full/half duplex mode.
2. Connect ISDN Phone Line
Using a cable fitted with RJ45 plugs, connect the ISDN port on the Internet Router
to the S/T interface on the ISDN NT-1 (Network Termination 1).
3. Power On and Check the LEDs
Connect the supplied power adapter to the Internet Router. When the Internet
Router is powered On, all LEDs should blink, then, except for the PWR LED, go
off. If LAN and ISDN connection is working fine, the LNK and LK leds will stay
ON.
2
8