Table of Contents
Advertisement
Internet Router User Guide
2.
If a line like the one highlighted ("TCP/IP -> Network Card") is not listed,
select Add-Protocol-Microsoft-TCP/IP-OK to add it.
3. Select Properties for the "TCP/IP -> Network card" entry. You will see a
screen like the following:
4. On the IP Address tab, click the radio button for "Obtain an IP address auto-
matically", as above, then reboot. Your PC will obtain an IP Address from the
Internet Router.
If you do not want to use the DCHP Server in Internet Router:
•
You may set DIP switch 2 ON to disable the DHCP server in the Internet
Router or leave it as Default (DHCP ON).
•
Enter a fixed IP Address on your PC, as shown below. Please make sure it does
not conflict with other PCs in the same LAN environment.
10
Figure 2: Network Configuration tab
Figure 3: TCP/IP Properties
Advertisement
Table of Contents
