Table of Contents
Advertisement
Internet Router User Guide
DIP Switches
Settings
SW1
SW2
Off
Off
Off
On
On
Off
On
On
1
Do not change the default values unless advised to do so by technical support staff.
2
This will override the setting on the DHCP Server screen.
3
Restores the default IP address (192.168.0.1), network mask (255.255.255.0) and
clears the password, provided the following procedure is carried out.
If you merely leave the DIP switches is this position, the Internet Router will
function normally.
ISDN Terminators: Please leave them as default.
Reset the device
If the Internet Router's IP Address or password is lost, the following procedure can
be used to recover from this situation.
1. Turn the power to the Internet Router OFF.
2. Set DIP switch 1 ON, and DIP switch 2 OFF.
3. Turn the power to the Internet Router ON.
4. Operate DIP switch 1 in the following sequence (you have 15 seconds to
complete the sequence):
•
OFF, ON, OFF
5. The Internet Router will now reset, and the Red LED will flash. The following
changes will have been made. (Other configuration data is unchanged.)
•
IP Address set to its default value of 192.168.0.1
•
Network Mask set to 255.255.255.0
•
The password cleared (no password).
6
SW3
SW4
SW5
Normal operation
Disable DHCP server
Restore defaults IP address
Reserved
Description
2
3
Advertisement
Table of Contents
