Table of Contents
Advertisement
If using an existing DHCP Server:
•
Configure it to provide the ISDN Internet Router's IP Address as the De-
fault Gateway.
•
The DHCP Server in the ISDN Internet Router should be disabled. This
setting is on the LAN Tab of the Manager utility.
ISDN Router's DHCP Server Settings unsuitable
If your LAN already has some devices using fixed IP Addresses, you need to set the
IP Address range used by the DHCP Server to be compatible. The DHCP Server
settings are on the LAN Tab of the Manager utility.
Your LAN has a Router
The Routing feature can be completely ignored if you do not have a router in your
LAN.
If you DO have a router, it is necessary to configure BOTH the Router and the
Routing table in the ISDN Internet Router correctly. See Routing for details.
Default ISDN Settings unsuitable
In rare cases, it may be necessary to change the ISDN settings (B Channel Speed,
Initialization string). These settings are on the ISDN Tab screen.
This screen also allows you to:
•
Temporarily switch the ISDN link OFF.
•
Use 2 B Channels for Internet access, rather than 1.
•
Set the outgoing call MSN and SAD. (MSN and SAD allow you to have
multiple phone numbers).
Once setup is complete:
•
Restart the ISDN Internet Router by disconnecting and reconnecting the
power.
•
Refer to the next document (LAN/PC Setup) for details on setting up each
PC, including the one used for configuration.
Setup: Internet Router
23
Advertisement
Table of Contents
