Table of Contents
Advertisement
Roll Paper
Option
The Roll Paper Option settings are only available
when Roll Paper or Roll Paper [Zero Margins] is
selected as the paper source. These features are not
available when Auto Sheet Feeder is selected.
The settings are as follows:
Banner Mode:
Select this mode when you wish to print multi-page
data as continuous data on the roll paper, rather
than as individual pages. When this check box is
selected, the Save roll paper check box is enabled.
Cut Sheet Mode:
Select this mode when you wish to print the multi-
page data as individual pages, rather than as
continuous data. When this check box is selected,
the Print page frame check box is enabled.
Save roll paper:
Select this check box when you wish to save roll
paper. When this check box is selected, the blank
portion of the last page of your document is not fed
through the printer. This feature is only available
when Banner Mode is selected.
Print page frame:
Select this check box to print a line on the roll paper
between pages in a multi-page document to
indicate where the paper should be cut. This feature
is useful when it is unclear where the page breaks
should be. This feature is only available when Cut
Sheet Mode is selected.
Using the Printer Software for Windows
2-17
Advertisement
Table of Contents
