Table of Contents
Advertisement
Cut Sheet Mode
Save roll paper
Print page frame
5. Click the Main tab, and select Photo Paper as the Media Type
setting.
6. Click OK to close the printer driver. Print your document and
proceed to the next section, "Removing the roll paper from
the printer" on page 1-29.
For Macintosh users
Note:
❏ The procedures described in this section may vary, depending upon
which application you are using. Check your application's user
manuals for details.
❏ When printing on roll paper, you cannot use the Reverse Order
or Rotate by 180° features, select Maximum or Centered as
the Printable Area setting, or use the functions in the Layout dialog
box.
❏ Do not select PhotoEnhance in the printer driver, because it may
cause offsets in the print area at logical page boundaries.
1-26
Paper Handling
Select this mode when you wish to print the
multi-page data as individual pages, rather
than as continuous data. When this check box
is selected, the Print page frame check box is
enabled.
Select this check box when you do not wish
any paper to be fed after the data is printed.
This feature is only available when Banner
Mode is selected.
Select this check box to print a line on the roll
paper between pages in a multi-page
document to indicate where the paper
should be cut. This feature is useful when it is
unclear where the page breaks should be or
where to cut the paper after the last page has
been printed. This feature is only available
when Cut Sheet Mode is selected.
Advertisement
Table of Contents
