Table of Contents
Advertisement
3. Load the paper into the sheet feeder and slide the left edge
guide against the left edge of the paper.
4. To load the sheet in the printer, lightly hold the paper in place
while you press the
Once the sheet is loaded, you are ready to print.
Note:
❏ You must hold the paper edge in place with your hand while you
E
press the
load/eject button to make sure the paper feeds correctly.
❏ If the paper does not feed correctly, remove the paper and try again.
If you have difficulty removing the paper, hold the
button for three seconds to eject it.
The roll paper sheet is now loaded in your printer. Next, set up
the printer driver and try printing. For details on setting up the
printer driver, refer to "Printing on roll paper" on page 1-22.
E
load/eject button, as shown below.
E
load/eject
Paper Handling
1-21
Advertisement
Table of Contents
