Preparation And Setup; Accessory Kit Contents; Location And Connection - Uni-ram URS1600 Series User Manual

MANUAL - SOLVENT RECYCLERS - URS1600 SERIES, URS2000 SERIES & RI 80 Rev 2019-05

PREPARATION AND SETUP:

• Carefully inspect the shipping carton for any sign of transport damage.
• Carefully remove the unit from the shipping carton.
• Check the unit for damage. Report any transport damage immediately to the carrier and your
vendor. Initiate a freight claim with the carrier. The manufacturer is not responsible for freight dam-
age.
• A Liner Bag and Retainer Ring are already installed inside the distillation tank.
• Check the Accessory Kit for the parts listed below. If any parts are missing, contact your supplier. Ad-
ditional consumables and accessories are also listed.
• Level the unit using the adjustable feet.

ACCESSORY KIT CONTENTS

Manual
Lid Gasket
Liner Bag, 2 Spares
Filler Hose and Suction Pipe Assembly
Note: Liner bags are not included with the model, RI80.

LOCATION AND CONNECTION:

This unit is classifi ed as Class 1, Division 1, Group D, Zone 1. Such equipment will not generate a spark.
This equipment may be safely placed in a Class 1, Division 1, Group D, Zone 1 locations where solvents
may be present. See Hazardous Location in the National Electrical Code for more information.
If this unit is placed in a Class 1, Division 2, Zone 2 or unclassifi ed location consider the area within 10
feet from the unit as Class 1, Division 2, a location where solvent is sometimes present. All equipment in
this area, such as electrical and ventilation equipment must be certifi ed for use in a Class 1, Division 2,
Zone 2 location. Such equipment cannot produce a spark. Equipment that can generate sparks, like gen-
eral plugs, welding equipment and power tools cannot be located in this area. Smoking is not permitted.
We recommend, as a best practice, that you keep this area open and free from all debris and equipment.
If you have a question contact your local fi re prevention authorities for advice. The unit must be at least 1
foot from the back wall and 10 feet from 3 other walls.
A qualifi ed electrician, in accodance with the National Electrical Code, must install an explosion
proof plug and recepticle.
Ventilation Required:
4