Stsw-Ifapgui Overview - ST X-NUCLEO-OUT02A1 Getting Started

1

STSW-IFAPGUI overview

The STSW-IFAPGUI
identify the firmware version.
The GUI can control the firmware for two
chaining via proper jumper configuration.
The GUI features:
• single or dual chip (daisy chaining) configuration
• output channel control by switching frequency (0 to 100 Hz) and duty cycle (0 to 100%)
• output enable signal control
• start/stop SPI signal sequence
• power good open drain monitoring status (ON/OFF)
• common fault open drain monitoring status (ON/OFF)
• output channel thermal fault monitoring status
UM2509 - Rev 1
Figure 2. STSW-IFAPGUI overview
®
is a Windows -based application able to control the
X-NUCLEO-OUT02A1
STSW-IFAPGUI overview
X-CUBE-OUT02 and automatically
boards stacked together by activating daisy
UM2509
page 2/12