Alesis 2 Reference Manual page 85

Chapter 6 - Advanced Applications
The cursor appears beneath the Generator, indicating that you may now turn the
[VALUE/ENTER] knob and select either Input Generator 1 or 2, depending on
which one you want to edit.
You may now select what the trigger source of the selected Input Generator will
be.
ª
Press [PAGE >] to advance the cursor to the next field, and turn the
[VALUE/ENTER] knob to set the selected Input Generator's trigger source to
either LEFT, RIGHT or L&R (both inputs).
D
Press [PAGE >] to advance to Modulation Page 6.
If the selected Input Generator's type is Input Envelope, the display will look like
this:
GEN 1 ENV ATK. THRESHOLD:
+0dB
If the selected Input Generator's type is Peak Follower, the display will look like
this:
GEN 1 PEAK FOLLOWER GAIN: x 1
The cursor appears beneath the Generator, indicating that you may now turn the
[VALUE/ENTER] knob and select either Input Generator 1 or 2, depending on
which one you want to edit.
«
Press [PAGE >] to advance the cursor to the next field, and turn the
[VALUE/ENTER] knob to adjust either the Envelope Attack Threshold (-32 to
+0dB) or the Peak Follower's Gain (x1 to x99).
»
Press [PAGE >] to advance to page 7.
If the selected Input Generator's type is Input Envelope, the display will look like
this:
GEN 1 ENV REL. THRESHOLD:
+0dB
If the selected Input Generator's type is Peak Follower, the display will look like
this:
GEN 1 PEAK FOLW. DECAY:
0.20Sec
Again the cursor appears beneath the Generator, indicating that you may now
turn the [VALUE/ENTER] knob and select either Input Generator 1 or 2,
depending on which one you want to edit.
...
Press [PAGE >] to advance the cursor to the next field, and turn the
[VALUE/ENTER] knob to adjust either the Envelope Release Threshold (-50 to
+0dB) or the Peak Follower's Decay Time (from 0.20 to 10.00 seconds).
If the selected Input Generator's type is input envelope:
1 1
Press [PAGE>] to advance to Page 8.
84 QuadraVerb 2 Reference Manual