Storing Edited Programs - Alesis 2 Reference Manual

Storing Edited Programs

Once you are satisfied with the changes you have made to a Program, or are creating
a new Program from scratch, you will need to store your edited Program back into
memory. The QuadraVerb 2 will store the currently selected Program in memory
(which is retained when the unit is turned off). If you edit a Program, the changes you
made will still be there the next time you switch on the unit, even if you hadn't stored
the edited Program into memory yet. However, if you select another Program from
memory before storing the edited Program, your changes will be lost. Although the
QuadraVerb 2 has two banks (Preset and User), you can only store Programs in the
User bank.
The Preset bank cannot be permanently changed. If you edit a Program selected
J
from the Preset bank, you will be able to make changes, but when you attempt to
Store the edited Program, it will be stored into the User bank (in the selected number
location).
To store an edited Program into memory:
¿
Press the [STORE] button.
The [STORE] button's LED will light. The display will read:
STORE AT: XX "nnnnnnnnnnnnnn"
...whereby XX is a Program number from 0 to 99 and nnnn is the name of the
program that will be overwritten. Both the Program number and name will be
flashing.
¡
Turn the [VALUE/ENTER] knob to select the Program number location in the
User bank to store the edited Program into.
¬
Press the [VALUE/ENTER] button.
The display will momentarily read:
After storing, the User Program location you chose will automatically be selected
and shown in the display (example: if you edited Program 13 and stored it into
location 25, Program 25 will be selected).
QuadraVerb 2 Reference Manual
Your First Session With The QuadraVerb 2 - Chapter 2
PROGRAM STORED
25