Auditioning Internal Programs; Switching Between Preset And User Banks - Alesis 2 Reference Manual

Auditioning Internal Programs

You can audition the Programs in the QuadraVerb 2 by using the [VALUE/ENTER]
knob or the front panel buttons, whenever the QuadraVerb 2 is in Program mode (the
[PROGRAM] button's LED will be lit).
To select a Program using the [VALUE/ENTER] knob:
¿
Press [PROGRAM].
The [PROGRAM] button's LED will light.
¡
Turn the [VALUE/ENTER] knob.
Note: The [VALUE/ENTER] knob has two modes when used for selecting Programs:
Direct and Deferred. Direct mode immediately recalls the displayed Program as you
turn the [VALUE/ENTER] knob. Deferred mode lets you scroll through the Programs
in the display by turning the [VALUE/ENTER] knob, but you must press the
[VALUE/ENTER] button to actually recall a Program. For more information on
choosing between Direct and Deferred mode, see chapter 5.
To select a Program using the front panel buttons:
¿
Hold the [PROGRAM] button.
¡
Use the [1] through [0] buttons to directly select Programs 00 through 99.
These are the right-most ten buttons on the front panel, which double for
[BLOCK >], [TYPE], [ROUTING] , etc.
The top line of the display will change to indicate the currently selected Program
number (from 00-99) and its name.
PROGRAM: 00 "More Divisions"
The left side of the display always indicates the currently selected Program number (00 – 99).
Directly beneath the two-digit Program number, the word "PRESET" will appear when the Preset
bank is selected.
PROGRAM
PRESET
contain 100 Programs. However, the Preset bank cannot be permanently changed.
You can edit the Preset Programs, but you can store them only in the User bank. To
switch between the Preset and User bank, follow these steps:
¿
Press and hold the [PROGRAM] button.
¡
Use the [< BLOCK] and [< PAGE] buttons to select either PRESET or USER.
When the Preset bank is selected, the display will show the word " PRESET "
beneath the PROGRAM Number in the lower left corner. If the User bank is
selected, the word " PRESET" will not be visible .
QuadraVerb 2 Reference Manual
Your First Session With The QuadraVerb 2 - Chapter 2

Switching Between Preset and User Banks

There are two banks in the QuadraVerb 2: Preset and User. They both
21