Advertisement
5 Connect one end of the supplied Ethernet cable to any of the computer's Ethernet ports and the other end
to any of the Modem/Router's LAN ports.
6 Plug the supplied power cube into the Modem/Router and then into a power outlet. The Modem/Router
has completed powering up when the Status light
Important: Use only the power cube shipped with the Modem/Router. Other power cubes may damage
the device.
7 Check that the Signal Strength light
please go to Troubleshooting your Internet Connection. A red light means that the Modem/Router
can not talk to the mobile broadband network. A green light means you have strong signal, and an amber
light means you have a weak signal. If your light is amber, you may try changing the antenna orientation
or moving the unit to another location. Normally best cellular performance occurs when the antenna is
vertical and when the Modem/Router is not too deep inside a building. For best performance, the
Modem/Router should not be on top of a metal surface
8 Turn on the computer. The connected Ethernet (LAN) port Light should start blinking. If the connected
Ethernet (LAN) Light doesn't blink, please see the Troubleshooting Tips in the User Manual on the CD.
Configuring the Software
1 In the computer's Web browser address bar, type http://192.168.2.1 and then press Enter.
2 When the USER'S MAIN MENU opens, it displays a Status page that lists the current values for a variety
of settings. If the Status page doesn't appear, please see the Troubleshooting Tips in the User Manual
on the CD.
3 In the System Password field, type admin and then click Login.
4 From the ADMINISTRATOR'S MAIN MENU select Setup Wizard. Click Enter. Then click Next.
5 On the Setup Login Password page, you can change the default password by typing admin in the Old
Password dialog box. Then type in a new password of your choice into the New Password and
Reconfirm dialog boxes. Make sure to save the password in a good place, such as the bottom of your
Modem/Router. Click Next. If you don't want to change the default password, leave all the dialog boxes
blank and click Next.
6 On the Setup Time Zone page, select the correct time zone and click Next.
7 On the Select Wan Type page, select You want to use the built-in mobile broadband modem to
connect to the Internet and click Next. If instead you wish to use a cable or DSL modem as your first
choice for connecting to the Internet, please refer to chapter 2 of the full-length user manual on the CD for
instructions.
8 On the Setup 3G+ page, Auto-Detection is enabled by default to automatically detect your SIM card
settings. A message will appear if auto-detection was successful or not. If auto-detection was successful
click Next. If auto-detection failed to detect your SIM card settings click OK to close the message box and
then select Manual Setup. On the Manual Setup page select your Country, and then select the name
of your Service Provider from the drop down list. The rest of the fields on the page are automatically
filled in. If a field is left empty, don't worry that field is not used for your provider. Click Next.
Note: If your country or service provider does not appear in the dropdown list you must manual enter your
service providers settings on the Basic Setup page. Please see Chapter 7, Using the Configuration
Manager's Advanced Program for how to do this.
9 Wireless Settings (WiFi):
Wireless Function: Is enabled by default. You may choose to disable the Wireless Function if you
are not using wireless functionality.
Wireless Network Name(SSID): The name of your wireless network. By default your wireless
network name is Zoom_xxxxxx, where xxxxxx is a random 4 to 6 digit string. Your default
Wireless Network Name is printed on the bottom label of your Modem/Router.
starts blinking.
has changed from red to green or amber. If the light remains red
Advertisement
